Table of Contents
Advertisement
ENGINE MECHANICAL - Cylinder Head (4A-GE)
EM-51
EM1612
'I·/~""·~
Fl0950
EM4618
EM4593
(c)
Install the manifold stay.
18. INSTALL DELIVERY PIPE WITH INJECTORS
(a)
Replace the 0-ring on to the injector.
(b)
Install the four insulators into the injector holes of the
cylinder head.
(c)
Install the three spacers on the cylinder head.
(d)
Install the injectors on the cylinder head together
with the delivery pipe.
(e)
Check that the injectors rotate smoothly.
(f)
Install and tighten the three bolts.
Torque:
175 kg-em (13 ft-lb, 17 N·m)
19. INSTALL EXHAUST MANIFOLD
(a)
Install the lower heat insulator to the manifold with
the three bolts.
(b)
Install a new gasket, the exhaust manifold with the
three bolts and two nuts.
Torque:
250 kg-em (18 ft-lb, 25 N·m)
(c)
Install the manifold stay with the bolt and nut.
Torque:
400 kg-em (29 ft-lb, 39 N·m)
(d)
Install the upper heat insulator with the six bolts.
Advertisement
Table of Contents
Troubleshooting
