Table of Contents
Advertisement
AT-124
AUTOMATIC TRANSAXLE- Assembly of Transmission
AT0619
AT0622
52. INSTALL SECOND BRAKE INTO CASE
(a)
Install the flange, facing the flat end upward.
(b)
Install in order: Disc-plate-disc-plate-disc-plate
53. INSTALL PISTON RETURN SPRING ASSEMBLY
Install each of the springs over the protrusions in the case.
54. INSTALL SECOND BRAKE DRUM INTO CASE
Align the groove of the drum with the bolt and place it into
the case.
55. INSTALL SNAP RING
(a)
Place the snap ring into the case so that the end gap
is installed into the groove.
(b)
While compressing the piston return springs over the
drum with hammer handles. install the snap ring. Be
sure the end gap of the snap ring is not aligned with
one of the cutouts.
Advertisement
Table of Contents
Troubleshooting
