SUPERCHARGER SYSTEM - Supercharger
SC-15
F7104
6.
INSTALL CLUTCH FLANGE
Install the clutch flange with the five bolts.
Torque:
50 kg-em (43 in.-lb, 4.9 N·ml
7.
INSTALL CLUTCH STATOR
(a)
Align the hole of the clutch flange with the protrusion
of the clutch stator.
(b)
Using snap ring pliers, install the snap ring, facing the
taper side toward the front.
8.
INSTALL CLUTCH PULLEY
(a)
Install the clutch pulley.
(b)
Using SST, install the ring nut.
SST 09814-22010
Torque:
250 kg-em (18 ft-lb, 25 N·ml
9.
INSTALL CLUTCH HUB
(a)
On the shaft install the shim used previously, then
install the clutch hub.
(b)
Using SST, install and torque the nut.
SST 09504-00011
Torque:
200 kg-em (14 ft-lb, 20 N·m)