Installation Of Transaxle - Toyota MR2 1988 Repair Manual

MT-96
SST
(C52 M/T)
(E51 M/T)
MANUAL TRANSAXLE - Installation of Transaxle
E6517
00181
INSTALLATION OF TRANSAXLE
1. INSTALL SIDE GEAR SHAFT TO RANSAXLE
(a) Insure that a new snap ring is positioned securely in
the groove of the side gear shaft.
(b) (C52 M/T)
Using SST, drive in the side gear shaft until it makes
contact with the pinion shaft.
SST 09520-32012
(E51 M/T)
Using a brass bar and hammEir, drive in the side gear
shaft until it makes contact with the pinion shaft.
NOTE: Whether or not the side gear shaft is making con-
tact with the pinion shaft can be known by the sound or
feeling when driving it in.
2. INSTALL TRANSAXLE TO ENGINE
Align the input shaft spline with the clutch disc, and install
the transaxle to the engine. Torque the bolts.
Torque: 12 mm bolt 650 kg-<:m (47 ft-lb, 64 N·m)
10 mm bolt 470 kg-<:m (34 ft-lb, 46 N·m)
3. INSTALL LEFT ENGINE MOUNT'ING
Install the left engine mounting wiith the bolts.
Torque the bolts.
Torque: 530 kg-em (38 ft-lb, 52 N·m)
4. INSTALL REAR ENGINE MOUNTING
Install the rear engine mounting with the bolts.
Torque the bolts.
Torque: 530 kg-em (38 ft-lb, 52 N·m)