Table of Contents
Advertisement
REAR AXLE AND SUSPENSION - Rear Drive Shaft
RA-29
E6522
7-1. (4A-GE)
TIGHTEN INBOARD JOINT HOLDING SIX NUTS
Torque the six nuts while depressing the brake pedaL
Torque:
370 kg-em (27 ft-lb, 36 N·m)
7-2. (4A-GZE)
TIGHTEN INBOARD JOINT HOLDING SIX HEXAGON
BOLTS
Using SST, torque the six hexagon bolts while depressing
the brake pedal.
SST 09043-88010
Torque:
660 kg-em (48 ft-lb, 65 N·m)
8.
INSTALL BEARING LOCK NUT, LOCK NUT CAP AND
NEW COTTER PIN
(a)
Torque the bearing lock nut while depressing the
brake pedaL
Torque:
1,900 kg-em (137 ft-lb, 186 N·m)
(b)
Install the lock nut cap and, using pliers, install a new
cotter pin.
9.
FILL TRANSAXLE WITH GEAR OIL OR FLUID
10. INSPECT REAR WHEEL ALIGNMENT
(See page RA-3)
Advertisement
Table of Contents
Troubleshooting
