Replacement Of O-Ring; Install Oil Pump Mounting Bolt - Toyota MR2 1988 Repair Manual

AUTOMATIC TRANSAXLE - Oil Pump
AT-49
REPLACEMENT OF 0-RING
1. REMOVE OIL PUMP
(a) Position the transmission with the oil pump facing
upward.
{b) Remove the seven bolts.
(c) Pull up the oil pump to where the 0-ring can be
removed with SST.
SST 09350-32013 (09351-32061)
(d) Temporarily install the bolt.
2. REMOVE 0-RING
3. INSTALL NEW 0-RING
4. INSTALL OIL PUMP MOUNTING BOLT
Tighten the seven bolts uniformly and a little at a time.
Torque: 250 kg-em (18 ft-lb, 25 N·m)