Connect No.2 Fuel Hose; Install No.1 Vacuum Transmitting Pipe; Connect No.3 Fuel Pipe; Install No.2 Air Outlet Duct - Toyota MR2 1988 Repair Manual

ENGINE MECHANICAL - Cylinder Head (4A-GZE)
EM-63
13. INSTALL CYLINDER HEAD REAR COVER
14. CONNECT NO.2 FUEL HOSE
(a) Install the pulsation damper with new gaskets.
Torque: 300 kg-em (22 ft-lb, 29 N·ml
(b) Clamp the hose to the cylinder head rear cover with
the bolt.
15. INSTALL NO.1 VACUUM TRANSMITTING PIPE
(a) Install the No. 1 vacuum transmitting pipe with
modulator with the two bolts.
(b) Connect the EGR modulator hose.
(c) Connect the vacuum hose.
16. CONNECT NO.3 FUEL PIPE
(a) Connect the No. 3 fuel pipe with the union bolt and
new gasket.
Torque: 150 kg-em (11 ft-lb, 15 N·ml
(b) Clamp the No. 3 fuel pipe with the two bolts.
17. INSTALL NO.2 AIR OUTLET DUCT
(a) Install the No. 2 air outlet duct with a new gasket, the
two bolts and two nuts.
Torque:
95 kg-em (82 in.-lb, 9 N·ml
(b) Connect the cold start injector pipe to the delivery
pipe with new gaskets and the union bolt.
Torque:
150 kg-em (11 ft-lb, 15 N·ml
18. INSTALL SUPERCHARGER (See page SC-17)