CL-6
CLUTCH -
Clutch Master Cylinder
CL0326
Cl0327
Cl0328
Cl0329
4.
DISCONNECT CLUTCH LINE TUBE
Remove the union bolt and disconnect the clutch line. Use
a container to catch the fluid.
5.
REMOVE CLEVIS PIN AND CLIP
Remove the clip and clevis pin.
6.
REMOVE MASTER CYLINDER
Remove the mounting nuts and remove the master
cylinder.
DISASSEMBLY OF MASTER CYLINDER
(See page CL-5)
1.
REMOVE RESERVOIR TANK
2.
REMOVE PUSH ROD ASSEMBLY
(a)
Pull back the boot and, using a screwdriver, remove
the snap ring.
(b)
Pull out the push rod assembly.
3.
REMOVE PISTON
Using compressed air, remove the piston from the
cylinder.