Table of Contents
Advertisement
I
FRONT AXLE AND SUSPENSION - Front Shock Absorber
FA-19
FA1306
C9943
FA1479
(c)
Insert the bolts and align the matchmarks of the
camber adjusting cam with the shock absorber.
(d)
Install and torque the nuts.
Torque:
1,450 kg-em (105 ft-lb, 142 N·m)
4.
CONNECT STABILIZER LINK
Connect the stabilizer link to the shock absorber assemb-
ly.
Torque:
650 kg-em (47 ft-lb, 64 N·m)
NOTE:
If the ball joint stud turns together with the nut,
use a hexagon wrench to hold the stud.
5.
CONNECT FLEXIBLE HOSE
(a)
Run the flexible hose through the shock absorber.
(b)
Connect the flexible hose to the disc brake caliper
with the union bolt and new gaskets. Torque the
union bolt.
Torque:
310 kg-em (22 ft-lb, 30 N·m)
NOTE:
When connecting the flexible hose to the caliper,
connect so the peg aligns with the hole.
6.
INSTALL CLIP
7.
BLEED BRAKE LINE (See page BR-6)
8.
INSPECT CAMBER (See page FA-3)
Advertisement
Table of Contents
Troubleshooting
