Inspect Toe-In - Toyota MR2 1988 Repair Manual

RA-4
~
Less Camber
I
REAR AXLE AND SUSPENSION - Rear Wheel Alignment
Z9556
AA1110
01663
RA0293
4. ADJUST CAMBER
(a) Loosen the shock absorber set nut.
(b) Turn the cam to adjust.
NOTE: Camber changes about 18' with each graduation
of the cam.
Camber:
Adjustment standard:
Left-right error:
-55'± 30'
30' or less
(c) Torque the shock absorber set nut.
Torque: 2,300 kg-em (166 ft-lb, 226 N·m)
5.
INSPECT TOE-IN
Adjust toe-in with a toe-in gauge in the following pro-
cedure.
(a) Bounce the vehicle up and down to stabilize the
suspension.
(b) Move the vehicle forward about 5 m (16.4 ft) with
the front wheels in the straight-ahead position on a
level place.
(c) Mark the center of each rear tread and measure the
distance between the marks of the right and left tires.
(d) Advance the vehicle until the marks on the rear sides
of the tires come to the measuring heights of the
gauge on the front side.
NOTE: If the tire rolls too far, repeat from step (b).