Table of Contents
Advertisement
BR-22
BRAKE SYSTEM - Front Brake
110907
110908
80909
DISASSEMBLY OF CYLINDER
(See page BR-18)
1.
REMOVE FOLLOWING PARTS
(a)
Two cylinder sliding bushings
(b)
Four dust boots
(c)
Two collars
2.
REMOVE CYLINDER BOOT SET RING AND CYLINDER
BOOT
Using a screwdriver, remove the cylinder boot set ring and
cylinder boot.
3.
REMOVE PISTON FROM CYLINDER
(a)
Put a piece of cloth or such between the piston and
cylinder.
(b)
Use compressed air to remove the piston from the
cylinder.
WARNING:
Do not place your fingers in front of the
piston when using compressed air.
4.
REMOVE PISTON SEAL FROM BRAKE CYLINDER
Using a screwdriver, remove the piston seal.
Advertisement
Table of Contents
Troubleshooting
