Table of Contents
Advertisement
SC-6
SUPERCHARGER SYSTEM - Supercharger
1.
DISCONNECT CABLE FROM NEGATIVE TERMINAL
OF BATTERY
2.
DRAIN ENGINE COOLANT
3.
REMOVE RADIATOR RESERVOIR TANK
4.
REMOVE VSV
5.
REMOVE INTERCOOLER
Disconnect the two hose clamps, and remove the four
bolts and intercooler.
6.
REMOVE AIR FLOW METER WITH N0.3 AIR CLEANER
HOSE
(a)
Disconnect the air flow meter connector.
{b)
Remove the bolt and EGR VSV without disconnect
the connector.
{c)
Loosen the two clamps, and remove the three bolts
and air flow meter with No.3 air cleaner hose.
7.
DISCONNECT ACCELERATOR CABLE (ROD) AND
THROTTLE CABLE
8.
DISCONNECT FOLLOWING HOSES:
{a)
PCV hose
{b)
Brake booster hose
{c)
ACV hose
{d)
A/C idle up vacuum hose
{e)
Emission control vacuum hoses
9.
REMOVE NO.I INTAKE AIR CONNECTOR PIPE WITH
AIR HOSE
10. REMOVE DRIVE BELT (FOR SUPERCHARGER)
Loosen the idler pulley lock nut and adjusting bolt, and
remove the drive belt.
Advertisement
Table of Contents
Troubleshooting
