4A-GE
~Union
Bolt
~ SST (Union)
Gasket~~
:1:&
~sTIIHosel
4A-GZE
4A-GZE
EFI SYSTEM - Fuel System
Fl-75
FI0266
Fl1236
F10267
Fl1239
INSPECTION OF COLD START INJECTOR
CHECK INJECTION OF COLD START INJECTOR
(a)
Install the gasket, SST (Two unions), another gasket
and two union bolts to the delivery pipe and injector.
(b)
Connect the SST (Hose) from the unions.
SST 09268-41 045
(c)
Connect the SST (Wire) to the injector.
SST 09842-30050
WARNING:
Position the injector as far away from
the battery as possible.
(d)
Put a container under the injector.
(e)
Turn the ignition switch ON.
NOTE:
Do not start the engine.
(f)
Short terminals FP and +B of the check connector
with a service wire.
(g)
Connect the test probes of the SST to the battery
and check that the fuel spray is as shown.
SST 09842-30050
CAUTION:
Perform this check within the shortest
possible time.