Table of Contents
Advertisement
Mounting the projector
There are several methods for mounting the projector. In typical front and rear screen installations
the projector can be mounted to a secure and level surface, such as a table or cart. Carts are useful
when the projector has to be moved often. To prevent accidental movement during a presentation,
lock the wheels on the cart.
Ceiling mount
The projector can be inverted and suspended from the ceiling using a specially designed ceiling
mount fixture 118-100108-XX. This mounting is recommended for installations that want the
projector out of plain view or have limited amount of space for the projector. For more information,
contact your dealer.
Warning! Failure to comply with the following could result in death or serious injury.
• Use only the Christie approved ceiling mount kit designed for your projector.
Special mounting
The projector can also be rotated (front-to-back) up to 360 degrees and fixed in a rotated position
without affecting performance. However, to ensure optimal performance of the projector the side-
to-side tilt limit of the projector must not exceed +/-15 degrees.
Stacking projectors in a frame
The M Series projectors can be stacked up to a maximum of three projectors high using the Christie
stacking frame (118-100107-XX).
1. Turn the projector OFF and disconnect the AC power cord after the cooling fans have stopped.
2. Make sure the base plate is flat.
3. Place the projector into the stacking frame from the top or from the front.
4. Prior to placing the projector from the front make sure the pitch is to its maximum.
5. Make sure the bottom base plate of the frame is aligned with the projector.
M Series Quick Start Guide
020-101941-01 Rev. 1 (07-2015)
Installation and Setup
13
Advertisement
Table of Contents
