Stacking Projectors - Christie CP2308-G Installation And Setup Manual

B Lock
C Turn to adjust height
2. Extend or retract the feet.
3. When the adjustment is correct, tighten the lock nut.

Stacking projectors

To stack CP2308-G projectors, use the stacking kit provided.
The stacking kit includes these parts:
Locking bracket (quantity 4)
When stacking projectors, the optical axis of the projectors must be parallel to one another. The
maximum tilt for stacked projectors is 13 degrees. When you install the stacked projectors in a rack
stand or on a pedestal, the rack stand or the pedestal must remain horizontal. If you require tilt to
align your images, you must tilt the projectors and not the rack stand or pedestal.
1. On the bottom projector, remove the four corner screws securing the top lid.
CP2308-G Installation and Setup Guide
020-102866-01 Rev. 1 (05-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Stacking cup (quantity 4)
Installation and setup
M6 screw (quantity 4)
12