Projector Components - Front; Projector Components - Rear; Lifting And Positioning The Projector; Stacking Projectors - Christie CP2208 User Manual

Projector components - front

Learn about the components on the front of the projector.
A Touch panel
A touch-sensitive screen used to control the
projector.
B Communications panel
External devices are connected here.
C Adjustable feet
Turn the adjustable feet to increase or
decrease the projector height.
D Air Filter

Projector components - rear

Learn about the components on the back of the projector.
A Service access door
B Power cord and AC receptacle
C Light source access door

Lifting and positioning the projector

Safely lift and position the projector in the location where it will be used.
Warning! If not avoided, the following could result in death or serious injury.
• Do not install or operate the projector in any position that does not meet the stated product
specifications for alignment and orientation.
Position the projector so it is centered and parallel with the theater screen. If space is limited,
aim the projector slightly off-center and use lens offset to center the image on the screen.

Stacking projectors

To stack CP2208 projectors, use the stacking kit provided.
The stacking kit includes these parts:
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
E Air filter cover and air filter
Located behind the air filter cover is a
replaceable air filter.
F Projector lens
A list of available lenses is available in the
projector specifications.
G Lens surround
H Top lid
Installing and setting up
13