Special Mounting; Stacking Projectors In A Frame - Christie Mirage M Series User Manual
High resolution video/graphics three chip 1080p hd, sxga+, and wuxga projectors.
Hide thumbs
Also See for Mirage M Series:
- User manual (162 pages) ,
- Setup manual (72 pages) ,
- Instruction sheet (3 pages)
Table of Contents
Advertisement
Special mounting
The projector can be rotated (front-to-back) up to 360 degrees and fixed in a rotated position
without affecting performance. However, to ensure optimal performance of the projector the side-
to-side tilt limit of the projector must not exceed +/-15 degrees.
Stacking projectors in a frame
The Mirage M Series projectors can be stacked up to a maximum of three projectors high using the
Christie stacking frame (P/N: 118-100107-XX).
1. Turn the projector off and disconnect the AC power cord after the cooling fans have stopped.
2. Make sure the base plate is flat.
3. Place the projector into the stacking frame from the top or from the front.
4. Prior to placing the projector from the front make sure the pitch is to its maximum.
5. Make sure the bottom base plate of the frame is aligned with the projector.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Installation and Setup
28
Advertisement
Table of Contents
