For stacking application, the elevator feet of the upper projector must be adjusted to increase the
height of this projector to avoid the interference between two projectors. For more information on
stacking projectors, refer to
Stacking Application
If two projectors are mounted on top of each other without using a frame, adjust the rubber feet of
the upper projector to avoid the interference between the two projectors.
The maximum adjustable range of the rubber foot is 13 mm (0.5 inches).
13mm
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Stacking Application
Adjust the rubber feet to avoid
13mm
interference.
Interference between
two projectors.
Interference between two
projectors.
Adjusting the size and position
on page 26.
26