Ir Control Switching - Barco HDF Use And Installation Manual

Image 13-58
Wireless default gateway, input
Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.

13.6 IR Control switching

What can be done ?
Each IR receiver inside the projector can be activated or deactivated. When an IR receiver is deactivated, no IR signal sent to this
IR receiver will be processed.
How to activate or deactivate
Press Menu to activate the menus and select Projector Control → IR control.
Image 13-59
Main menu, projector control
R5905158 HDF SERIES 16/06/2015
Image 13-60
Projector control, IR control
13. Projector Control
225