Wireless Default Gateway Set Up - Barco HDF W series Installation Manual

13. Projector Control

13.5.11 Wireless default gateway set up

Can only be used with a wireless network module installed.
How to set up
1. Press Menu to activate the menus and select Projector Control → Network → Wireless Setup. (image 13-53, image 13-54,
image 13-55, image 13-56)
2. Press ENTER to open the Wireless menu.
3. Use the ▲ or ▼ key to select Subnet Mask and press ENTER to activate the input box. (image 13-57)
4. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
Image 13-53
Main menu, projector control
Image 13-55
Network, wireless
178
Image 13-54
Projector control, network
Image 13-56
Wireless default gateway
R5905158 HDF W SERIES 10/07/2012