Change Language; Change Projector Address; Serial Communication - Barco ELM G10 Owner's Manual

Change Language

Start Up
1 Push the cursor key é or ê to highlight 'Change Language' (menu 1).
2 Press ENTER to display the language selection menu (menu 2).
Available languages : English
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS

SERIAL COMMUNICATION

Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Change Projector Address

How to change that address ?
1 Push the cursor key é or ê to highlight 'Change Proj. Address' (menu 1).
2 Press ENTER.
The Change Projector Address menu will be displayed and the actual address will be filled in.
The first digit is highlighted (menu 2).
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Entering the new projector address.
1 the digit keys on the RCU or the local keypad or
2 use the control disc to the right or to the left to select a digit and change the value by pushing the control disc up or down until the
new value is reached. Continue with the other digits on the same way.
Serial Communication
Start Up the Serial Communication menu
1 Key é or ê to highlight 'Serial Communication' (menu 1).
2 Press ENTER to display the Serial Communication menu (menu 2).
The baudrate, interface standard and termination can be installed.
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5976070 BARCOELM G10 05052000
Downloaded From projector-manual.com Barco Manuals
SERVICE
CHANGE LANGUAGE
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
SERVICE CHANGE PROJ. ADDRESS
Enter new address
LAMP
Select with ç or è
MORE ...
Reprogram with é or ê
or numeric keys
<ENTER> to confirm
<EXIT> to return
menu 2
SERVICE SERIAL COMMUNICATION
PROJECTOR ADDRESS 001
BAUDRATE [115200]
INTERFACE STANDARD [RS232]
RS422 TERMINATION [ON]
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
English
001
Service Mode
9-5