Serial Communication; Start Up Of The Serial Communication; Baud Rate Setting - Barco barcoelm r18 Owner's Manual

9. Service Mode

9.7 Serial Communication

Overview
•

Start Up of the Serial Communication

•

Baud rate Setting

• Setting up the Interface Standard
• RS422 Termination
9.7.1 Start Up of the Serial Communication
Start up
1. Push the cursor key ↑ or ↓ to highlight Serial communication. (menu 9-15)
2. Press ENTER to display the Serial Communication menu. (menu 9-16)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-15
9.7.2 Baud rate Setting
Set up
To change the baud rate, handle as follow:
1. Push the cursor key ↑ or ↓ to highlight Baudrate. (menu 9-17)
The actual baud rate will be displayed.
2. Press ENTER to toggle between the available baudrates.
Default : 9600
SERIAL COMMUNICATION
PROJECTOR ADDRESS 001
BAUDRATE [115200]
INTERFACE STANDARD [RS232]
RS422 TERMINATION [ON]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-17
Available baud rates.
115200/57600/38400/19200/9600/4800/1200
92
Downloaded from ProjectorsManual.com Manuals
SERIAL COMMUNICATION
PROJECTOR ADDRESS 001
BAUDRATE [115200]
INTERFACE STANDARD [RS232]
RS422 TERMINATION [ON]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-16
R5976333 BARCOELM R18 17092002