9. Select Save.
The Original Size Defaults screen is displayed.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.
Output Size Defaults
Output Size Defaults
Select the sizes that will be displayed as the Output Size when selecting Auto % for
scanning documents. Any output sizes can be assigned to output size buttons 1-14. By
selecting commonly used sizes, you can reduce the number of selection operations
required for a scan job.
Output Size Defaults includes the following options:
A / B Series: Select from 10 different A and B series sizes.
Inch Size: If you select this option, you can then select from 11 different inch-series
sizes.
Others: Select from fourteen other sizes.
Selecting Output Size Defaults
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Scan Service Settings .
5. Select Output Size Defaults.
6. Select the item to be set or changed.
7. Select Change Settings.
8. Select the default settings for the selected item.
9. Select Save.
The previous screen displays.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.
Xerox
®
Versant
®
80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-57