Other Settings (Scan Service Settings); Other Settings Overview (Scan Service Settings) - Xerox Versant 80 Press System Administration Manual

7. Select Change Settings.
8. Select the desired setting for that item.
9. Select Save.
The previous screen displays.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.

Other Settings (Scan Service Settings)

Other Settings Overview (Scan Service Settings)

Options include:
Memory Full Procedure: Select either Delete Job or Run Job as the default setting.
This default setting appears while scanning an original if there is insufficient hard
disk space for the scanner. If an insufficient amount of hard disk space is determined,
a confirmation screen appears asking how the partially stored data should be handled
(cancel job or run job). Additional options include:
- Delete Job: The stored data is discarded.
- Run Job: The partially stored data is treated as valid and complete, the job is
run.
Maximum Stored Pages: Select the maximum number of stored pages of a scan
original. Select a number from 1 through 999 pages.
Saturation: Select Pastel +2, Pastel +1, Normal, Vivid +1, or Vivid +2.
Background Suppression: Select either Off or Auto Suppression.
Shadow Suppression: Select either Off or On.
Color Space: Select whether or not to display the Color Space feature.
TIFF Format: Select the TIFF format for scanned data. Select either TIFF V6 or TTN2.
Image Transfer Screen: Select whether or not to display a message when the scan
process completes.
- Disabled: Do not show message.
- Display Message at End of Scanning: Show scan completion message.
- Display Scan and Transfer Screens: Show a screen while scanning an original
and upon completion of the scan process.
- Display Message at End of Transfer
Searchable Page Orientation: Select Auto Upright Orientation or According to
Original Orientation.
URL File Expiration: Set the retention period for files stored with the Store & Send
Link feature. You can specify a value from 1 to 168 hours in 1 hour increments. The
default value is 3 hours.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-59