System Administrator Overview; Entering / Exiting The System Administrator Mode; Locating The Press Ip Address - Xerox Versant 80 Press System Administration Manual

System Administrator
Overview
Entering / Exiting the System
Administrator Mode
1. Press the Log In/Out button on the press UI.
2. Enter the system administrator Login ID with the numeric keypad, and select Enter.
The default Login ID value is admin, and the default password is 1111.
Note
By default, the password prompt is not enabled.
3. To access system functions, press the Machine Status button on the UI.
4. To change settings, select the Tools tab.
5. Select the appropriate Mode, Group, and Feature.
6. To logout, press the Log In/Out button.
7. When the Logout screen appears, select Logout.

Locating the Press IP Address

The IP Address of the press is found on the Configuration Report and can be obtained
from the press touch screen. This address, however, is only used to enable
communication/network connectivity between the press and the print server.
To obtain the IP Address of the press:
1. At the press UI, press the Machine Status button.
Xerox ® Versant ® 80 Press
System Administration Guide
1
1-1