Xerox Versant 80 Press System Administration Manual page 174

Configure CentreWare Internet Services Settings
Digital Certificate
1. Click the Properties tab.
2. Enter the username and password.
The default username is admin and password is 1111.
3. Click the Security folder, then the Machine Digital Certificate Management link.
4. Click Create New Certificate. The Machine Digital Certificate Management page
refreshes and displays the Self-Signed Certificate area.
5. Select Continue. The Public Key Size, Issuer, and Days of Validity display.
6. Select Apply.
SSL
1. Click the Properties tab.
2. If necessary, enter the username and password.
The default username is admin and password is 1111.
3. Click the Security folder, then the SSL / TLS Settings link.
4. In the SSL / TLS Settings area, on the HTTP - SSL / TLS Communication line, click
Enabled.
5. Click Apply.
If changes are made to the SSL settings you may need to:
Reboot the system.
Close and reopen the client browser.
Ports
1. Click the Properties tab.
2. Click the Connectivity folder, then Port Settings.
3. On the SNMP line, click Enabled.
4. On the SMB line, click Enabled.
5. On the FTP Client line, click Enabled.
6. On the SOAP line, click Enabled.
7. Click Apply.
If changes were made to the SSL settings you may need to reboot the system.
IPv4 Default Enablement
1. Click the Properties tab.
2. Click the Connectivity folder, then the Protocols folder.
3. In the Protocols folder, click TCP / IP.
4. In the IP Mode area, on the IP Mode line, click or verify IPv4.
5. If you clicked IPv4, click Apply. EIP applications can now register to the device.
10-6 Xerox ® Versant ® 80 Press
System Administration Guide