Configuration On A Computer; Store To Web Services For Devices (Wsd); Configuring The Store To Wsd Environment Settings; Enabling The Wsd Scan Port - Xerox Versant 80 Press System Administration Manual

d) Select the UDP check box under SNMP.
e) Click Apply.
f) Enter the system administrator user ID and passcode and click OK.
The right frame of the web browser page changes to the machine reboot display.
g) Click Reboot Machine.
The machine reboots and the settings are enabled.

Configuration on a Computer

Create job flows by using the EasyOperator application and Device Setup. The created
job flows can be used for scanned documents.
Note
To use the EasyOperator application on a computer, refer to Driver CD kit that is provided
with the press for detailed information and instructions.

Store to Web Services for Devices (WSD)

Configuring the Store to WSD Environment Settings

This section describes how to configure the machine to use the Store to Web Services
for Devices (WSD) feature. WSD provides a way for clients to discover the device and
the services the device offers.
When a device is discovered, a client can retrieve a description of services hosted on that
device and use those services. WSD allows a client to:
Send messages to and from a web service.
Dynamically discover a web service.
Obtain a description of a web service.
Subscribe to and receive events from a web service.
Preparations
One of the following operating systems must be installed on the destination computer
to use the Store to WSD feature:
Microsoft Windows 7
Microsoft Windows Vista Service Pack 2

Enabling the WSD Scan Port

1. Login as the Administrator.
2. Press the Machine Status button on the press User Interface (UI).
3. Select the Tools tab on the UI.
4. Select System Settings.
Xerox ® Versant ® 80 Press
System Administration Guide
Configure Environment Settings for Scan Services
11-17