Xerox Versant 80 Press System Administration Manual page 181

Note
Before SNMPv3 can be enabled, a digital certificate must be installed on the press
and SSL/TLS must be enabled.
10. To edit SNMP v3 settings:
a) Under SNMP Properties, select Edit SNMP v3 Properties.
b) Under Administrator Account, select Account Enabled to create the administrator
account.
c) Type an Authentication Password and confirm it. This password is used to generate
a key used for authentication.
d) Type a Privacy Password and confirm it. This password is used for encryption of
SNMPv3 data. The passphrase used to encrypt the data needs to match with the
server.
The password must be at least eight characters in length and can include any
characters except control characters.
a) Under Print Drivers/Remote Clients Account, select Account Enabled.
b) Select Apply.
11. To add IP Trap Destination Addresses:
a) Select Advanced at the bottom of the page.
b) Under Trap Destination Addresses, select Add UDP IPv4 Address or Add UDP
IPv6 Address.
c) Type the IP address of the host running the SNMP manager application to be
used to receive traps.
Port 162/UDP is the default port for traps. You can select v1 or v2c
based on what the trap receiving system supports.
d) Under Traps, select the type of Traps to be Received by the SNMP manager.
e) Select Apply.
12. To add the Internetwork Packet eXchange (IPX routing protocol used by Novell
NetWare) Trap Destination Addresses:
a) Select Advanced at the bottom of the page.
b) Under Trap Destination Addresses, select Add IPX Address.
c) Type the 8-digit hexadecimal number that identifies the IPX External Network
host configured to receive the trap.
d) Type the 48-bit Physical MAC Address of the computer running the SNMP
manager application that is to receive the trap.
e) Type the IPX Socket Number of the computer running the SNMP manager
application configured to receive the packets.
f) Select the SNMP version, SNMP v1 or SNMP v2c based on the trap receiving
system.
g) Under Traps, select the type of Traps to be Received by the SNMP manager.
Xerox ® Versant ® 80 Press
System Administration Guide
Configure CentreWare Internet Services Settings
10-13