Copy Service Settings; Copy Service Settings Overview; Basic Copy Service Settings Procedure - Xerox Versant 80 Press System Administration Manual

The main Tools screen displays.
14. Exit the administrator mode.
Data Restoration: The enciphered data cannot be restored if any of the following occur:
When there is a physical hard disk error
When you cannot remember the encryption key
When attempting to access the Service Representative Operation Limit feature, but
you cannot remember the System Administrator User ID and password.

Copy Service Settings

Copy Service Settings Overview

Use the Copy Service Settings to select the default settings that affect the Copy feature.
Copy Service Settings includes the following features:
Preset Buttons
Use this feature to set the default settings for items such as the most commonly used
paper tray and magnification percentage.
Copy Defaults
Use this feature to select the default settings for the various copy features.
Copy Control
Use this feature to set the default settings that relate to the copy operation such as
auto job release and mixed size originals.
Original Size Defaults
Use this feature to set the original sizes displayed in Layout Adjustment > Original
Size .
Reduce/Enlarge Presets
Use this feature to set a maximum of 12 default magnification levels.
Custom Colors
Use this feature to set a maximum of six custom colors.

Basic Copy Service Settings Procedure

1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Copy Service Settings .
5. Select the item to be set.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-39