Selecting Other Settings (Scan Service Settings); E-Mail Service Settings; E-Mail Service Settings Overview - Xerox Versant 80 Press System Administration Manual

System Settings (Tools Administrator Mode)
Generation of URL Link: Set the format of URLs generated with the Store & Send Link
feature. Select either Use IP Address or Use FQDN.
Store & Send Link - Maximum File Size: Set the maximum data size of files that can
be stored for the Store & Send Link feature. You can specify the value from 1 to 200
MB in 1 MB increments. The default value is 200 MB.
Print Login Name on PDF Files: Select either No or Yes.

Selecting Other Settings (Scan Service Settings)

1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Scan Service Settings .
5. Select Other Settings.
6. Select the item to be set or changed.
7. Select Change Settings.
8. Select the desired setting for that item.
9. Select Save.
The previous screen displays.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.

E-mail Service Settings

E-mail Service Settings Overview

Use E-mail Service Settings to configure settings that are related to the e-mail service.
E-mail Service Settings consists of the E-mail Control feature.
E-mail Control consists of the following options:
Maximum Address Entries
Set the maximum number of addressees that can be specified when sending an e-mail.
The number of addressees is the total number in the To:, Cc:, and Bcc: fields. Set the
maximum number of addressees in the range from 1-100. If the maximum number of
addressees is exceeded, the email transmission is aborted.
4-60 Xerox ® Versant ® 80 Press
System Administration Guide