Maintenance; Maintenance Overview - Xerox Versant 80 Press System Administration Manual

6. Select the item to be set or changed.
7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.

Maintenance

Maintenance Overview

Use the Maintenance feature to further customize the press settings for the following
options:
Quick Home Setup
Use this option to create a quick page to be used as the Home screen.
Initialize Hard Disk
Use this option to initialize the machine hard disk. This erases any current data on the
hard disk. Refer to Initializing the Hard
USB Key
When enabled, this feature provides the capability to load software kit options using
a USB device connected to the system instead of a pin code.
Delete All Data
Use this option to select Delete Job or Run Job when the machine memory is full.
Delete Certificates / Initialize Settings
Deletes all certificates stored on the press and initializes the security settings associated
with certificates. This feature is designed to use when you cannot use a certificate data
on the press because of an abnormality of the certificate file even when the certificate
is set to enabled for SSL/TLS Settings under Connectivity & Network Setup > Security
Settings .
Power On Self Test
Select whether or not to perform a self test when the machine is switched on/started.
If any abnormal conditions are found, such as intentional program modification, the
machine stops and records the information in the audit log. If the machine does not
start, contact the Customer Support Center. Refer to
Software Options
This feature is for service representatives only. For more information, contact the Xerox
Customer Support Center.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
Disk.
Performing a Power On Self Test.
4-13