Selecting The Security Settings - Xerox Versant 80 Press System Administration Manual

c) In Kerberos Server Settings, you can set the following items:
Primary Server Name/Address
Primary Server Port Number
Secondary Server Name/Address
Secondary Server Port Number
Domain Name
d) Repeat the previous steps for any additional Kerberos servers.
e) Go to Step 13.
12. For SMB Server Settings, perform the following:
a) Select SMB Server Setup.
b) Select either By Domain Name or By Domain & Server Names/IP Address.
c) Select Save.
d) Select an SMB Server.
e) Select Change Settings.
f) In SMB Server Settings, set the Domain Name and the Server Name/IP Address.
g) Repeat the previous steps for any additional SMB servers.
h) Go to Step 13.
13. Select Save, if necessary.
14. Select Close until the main Tools screen displays.
15. Exit the administrator mode.

Selecting the Security Settings

1. Login as the Administrator.
2. Press the Machine Status button on the UI control panel.
3. Select the Tools tab on the UI.
4. Select System Settings.
5. Select Connectivity & Network Setup.
6. Select Security Settings.
7. Select one of the following items and then proceed to the next step:
SSL/TLS Settings
IPSec Settings
S/MIME Settings
IEEE 802.1x Settings
PDF/XPS Signature Settings
Certificate Revocation Retrieval Settings
Other Settings: FIPS140 Validation Mode
8. Select the item to be set or changed.
9. Select Change Settings.
10. Select the desired setting or enter the desired value.
11. Select Save.
12. Select Close to return to the Security Settings screen.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-51