Xerox Versant 80 Press System Administration Manual page 51

From the Interface Module or Interface Cooling Module, the amount of curl correction
is changed by selecting a related button on the control panel. The current selected
amount of curl correction is displayed by the LEDs.
The following curl correction options are available from the module's control panel:
1. Auto Curl button: This button selects the Auto Decurl function.
2. Manual Curl Up button: This button selects the three values of manual up curl.
3. Manual Curl Down button: This button selects the three values of manual down
curl.
4. Curl Up/Down indicators: These indicate the amount of manual curl (up or down)
that is selected.
5. Auto Curl indicator: This indicates that the Auto Curl Mode is selected.
Correcting Paper Curl from Adjust Paper Curl
If neither the press nor the Interface Module / Interface Cooling Module (if applicable)
corrects the paper curl, then use the Adjust Paper Curl option to compensate for paper
curl. Adjust Paper Curl options are based on the job type and image density ratio.
Note
Always refer to the latest Recommended Media List (RML) for the press for the
recommended paper types and weights and the default paper curl (decurler) settings
to use with them. The RML can be downloaded from www.xerox.com.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-21