Setting The Audio Tones; Screen Buttons / Settings; Screen / Button Settings Overview - Xerox Versant 80 Press System Administration Manual

Out of Paper Warning Tone
Select the volume level that sounds when there is no paper in the paper tray and the
job is left unattended.
Low Toner Alert Tone
Select the volume level that sounds when it is time to replace the drum toner cartridge.
Stored Programming
Select the volume level that sounds when the Stored Programming feature is enabled.

Setting the Audio Tones

1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Audio Tones.
6. Select the item to be set or changed.
7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.

Screen Buttons / Settings

Screen / Button Settings Overview

Use the Screen / Button Settings feature to set specific screens and buttons that are
displayed when the power is turned on, when exiting Power Saver, and more. Options
include:
Screen Default
Assign a default screen that displays when the machine powers on; selections include
Services, Copy, Job Status, or Machine Status.
Service Screen Default
Assign a default to the service screen; selections include Services Home, Copy, or Stored
Programming.
Service Screen After Auto Clear
Assign a default service screen that displays after Auto Clear occurs; select either
Services Home or Last Selection Screen.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-7