Low Power Mode; Sleep Mode; Exiting Energy Saver Mode - Xerox Versant 80 Press System Administration Manual

Mode begins. In other words, Sleep Mode activates 45 minutes after the Low Power
Mode begins.
If Low Power Mode is set to 15 minutes and Sleep Mode is set to 20 minutes, Sleep
Mode activates 5 minutes after Low Power Mode begins.
For information on changing the time intervals, refer to
Saver Time Intervals.

Low Power Mode

In this mode, the power to the User Interface (UI) and fuser unit is lowered to save
power. The display goes out and the Energy Saver button on the UI lights. To use the
press, press the Energy Saver button. The Energy Saver button is no longer lit, indicating
that the Energy Saver feature is canceled.

Sleep Mode

In this mode, the power is lowered more than in the Low Power mode. The display goes
out and the Energy Saver button on the UI lights. To use the press, press the Energy
Saver button. The Energy Saver button is no longer lit, indicating that the Energy Saver
feature is canceled.

Exiting Energy Saver Mode

The press exits Energy Saver mode by doing one of the following:
Pressing the Power Saver button on the press UI,
Receiving print data for an incoming job to be printed, or
Programming and performing a copy/scan job.
Xerox ® Versant ® 80 Press
System Administration Guide
System Administrator Overview
Setting / Changing the Power
1-5