Ethernet; Tcp / Ip - Xerox Versant 80 Press System Administration Manual

Hide thumbs Also See for Versant 80 Press:
Table of Contents

Advertisement

Configure CentreWare Internet Services Settings
A proxy server keeps any devices behind it anonymous and it decreases the amount of
time needed to access a resource by caching content such as Web pages from a Web
server.
1. In CentreWare Internet Services, select Properties > Connectivity > Protocols
2. Select Proxy Server.
3. Under General, next to Use Proxy Server, select Enabled.
4. Next to Proxy Setup, select Same Proxy for All Protocols to use the same proxy
settings for HTTP and HTTPs, or Different Proxy for each Protocol.
5. Under Addresses to Bypass Proxy Server, type any web addresses or domains that
you want to bypass the proxy server, such as your company's intranet site.
6. Under HTTP Server, type the Server Name and Port Number. The default port number
is 8080.
7. Next to Authentication, select Enabled if your proxy server is configured to require
authentication, then type a Login name and Password. Retype the password to
confirm.
8. Under HTTPS Server, enter the HTTPS proxy server information if needed.
9. Select Apply.

Ethernet

This section describes how to set the data transmission speed of the Ethernet interface
connection from CentreWare Internet Services. The default speed is Automatic, which
indicates the connection will go as fast as the other end.
1. From your computer workstation, open a web browser and enter the IP Address of
the print server in the Address bar to connect to CentreWare Internet Services.
2. Click the Properties tab.
3. Click Connectivity, then click Physical Connections to display the items in the folder.
4. Click Ethernet.
5. Set the communication speed for the Ethernet interface using the Rated Speed
pull-down menu.
6. Select Apply.

TCP / IP

Transmission Control Protocol (TCP) and Internet Protocol (IP) are two protocols within
the Internet Protocol Suite. IP manages the transmission of messages from computer
to computer while TCP manages the actual end-to-end connections. If the press has a
valid network address, you can configure TCP/IP settings in CentreWare Internet Services.
You can configure IPv4 settings at the press Control Panel or through CentreWare
Internet Services. You can only configure IPv6 through CentreWare Internet Services.
TCP/IP must be enabled at the press before you can access CentreWare Internet Services.
10-10
Xerox
®
Versant
®
80 Press
System Administration Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents