Xerox Versant 80 Press System Administration Manual page 110

Simple Image Quality Adjustment (SIQA)
11. Enter a name for this adjustment. For applying the adjustment later when printing,
it is useful to name the adjustment with the paper size and weight. For example,
11x17_220
12. Touch Save.
13. Touch Adjust Image Transfer.
14. Touch Change Settings.
15. Touch Select Sample Number.
16. Touch Sample Printout.
17. Touch Paper Supply and select the Paper Supply tray and paper for this procedure.
Select the type of stock on which you are seeing uneven color. If you are seeing the
problem on an 8.5x11 (A4) paper with a weight of 220 gsm, then if possible use an
11x17 (A3) size with the same weight 220 gsm. You need to match the weight, and
it is best to use a large size paper so that more target patches will be printed and
scanned.
18. Touch Save.
19. Under 2 Sided select either 1 Sided or 2 Sided. Select 1 Sided if you are printing
Simplex pages, and 2 Sided if you are printing Duplex pages.
20. Press the green Start button on the UI. A target print is made by the press.
21. Press Confirm when the printing is complete and you see the message Diagnostic
routine completed sucessfully.
22. Touch Close.
23. Touch Scan Calibration Chart.
24. Follow the on-screen directions to position the target on the document glass with
the code in the top left corner of the glass, and with Side 1 facing down. of the glass.
The code is a square with a black bar beside it on the top left of the page.
25. Place 5 sheets of blank white paper on top of the target.
26. Lower the Document Feeder Cover.
5-12 Xerox ® Versant ® 80 Press
System Administration Guide