Setting The System Clock / Timers - Xerox Versant 80 Press System Administration Manual

System Settings (Tools Administrator Mode)
Auto Clear
Sets the time period which determines when the machine returns to its default screen;
in other words, if a given time period elapses with no operation, the machine
automatically returns to the initial (default) screen. When this option is set for On,
select a time period between 10-900 seconds, in one second intervals.
Note
Even if Off is selected, any currently scanned and pending jobs continue processing
after one minute of inactivity on the machine.
Auto Job Release
If an error occurs during a copy or scan job, this sets the time that elapses until the
current job is automatically cleared, and thereby enables the completion of the next
job. When set for On, select a time period between 4-99 minutes, in one minute
increments. Select Off if you do not want to use this feature.
Auto Print
Set the time from the end of print job until the execution of next print job. When set
for On, select a time period between 1-240 seconds, in one second intervals. If Off is
selected, printing can start immediately, once the machine is ready.
Printer Lockout Duration
When set for On, select the time from the start to the end of printer lockout. Set the
values from 0-23 hours and to 59 minutes. If you select Off no printer lockout occurs.
Time Zone
Sets the time difference from Greenwich Mean Time (GMT).
Daylight Savings Time
With this feature enabled, the machine automatically adjusts the current time when
the summer time starts and ends. Options include:
Adjust off: Select this feature if you do not want to use the Daylight Savings feature.
Adjust by Month, Day & Time: Select this feature to specify the start of the daylight
savings feature, by month, day and time.
Adjust by Month, Week, Day of Week & Time: Select this feature to specify the
start of the daylight savings feature, by month, week, day of the week and time.

Setting the System Clock / Timers

1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select System Clock / Timers.
6. Select the item to be set or changed.
4-4 Xerox ® Versant ® 80 Press
System Administration Guide