Finisher Adjustment - Xerox Versant 80 Press System Administration Manual

4. If paper curl is still a problem, select and use one of the customized Types 1-10;
copy/print some samples and review the output.
5. If paper curl still persists after trying several or all of these settings, try decreasing
the image density on the print job or use a different type of paper.
6. If paper curl is still a problem, contact the Customer Support Center for further
assistance.
Adjusting the Paper Curl
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Maintenance.
6. Select Adjust Paper Curl.
7. Select one of the Type 1-10 items.
8. Select Change Settings.
9. Assign the desired parameters to the paper curl Type (1-10) option.
a) Select the Name field.
b) Use the keyboard to enter a name.
c) Select the appropriate settings for 1 Sided-Face Up, 1 Sided-Face Down, and 2
Sided output.
d) Use the arrow buttons to select the correct amount of curl.
Selecting Auto lets the system automatically adjust the paper curl.
e) Select Sample Printout.
f) Review the sample for paper curl.
If the sample printout still continues too much curl, further adjust the paper curl
parameters and print another sample printout.
10. Do one of the following:
If necessary, continue adjusting the paper curl parameters until satisfied with the
printouts.
A satisfactory printout is achieved; select Save.
11. Select Close twice.
The main Tools tab screen displays.
12. Exit the administrator mode.

Finisher Adjustment

Finisher Adjustment Overview
The Finisher Adjustment feature is available when optional finishing devices are attached
to the press, such as the following:
Standard Finisher (with or without C/Z Folder)
Booklet Maker Finisher (with or with C/Z Folder)
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-23