Upgrade Press Software - Xerox Versant 80 Press System Administration Manual

Configure CentreWare Internet Services Settings
1. Select E-mail > General and Edit
2. To receive notification of certain events that occur on the press such as
faults or errors, enter the press IP Address in the From Address field. The
name of the press is automatically shown.
3. Make sure the Enabled checkboxes are checked.
4. Keep Domain Filtering off or select its Edit button to define domains.
5. Select Apply to save settings. Print errors that occur will be shown on the
press touch screen.
USB: Do not change these settings. This feature is not applicable to the system.
Machine Software - Select one of the two upgrade options:
- Select Upgrades to enable or disable software downloads for the press
automatically as available. Select Apply to save the setting.
- Select Manual Upgrade if you want to Browse to the location of a software
download file and select it specifically. With the selected file in the Browse
field, select Install Software.

Upgrade Press Software

Use the following instructions to upgrade and download the system software remotely
through CentreWare Internet Services.
Note
The print server IP Address and customer password (if different than the default "admin")
are required. This procedure can also be used at the press.
1. At the press Control Panel, press the Clear All button twice. The Confirm button
displays, ensuring that the press is ready for download activity at CentreWare Internet
Services.
2. At the print server, open a browser window.
3. If the press is connected to a Fiery print server, type the print server address in the
Address Bar followed by :8080 (for example, http://123.456.789.123:8080). Press
Enter.
4. If the press is connected to a FreeFlow print server, type the print server address in
the Address Bar followed by :8082 (for example, http://123.456.789.123:8082). Press
Enter.
5. From the CentreWare Internet Services screen that displays, select the Properties
tab. A screen may open with prompt for a user name and password.
6. Select Services from the Properties menu in the left panel of the window.
7. Select Machine Software from the Services menu and Upgrades.
8. Select the Enabled checkbox and select Apply.
9. Select Manual Upgrade from the Services menu.
10-20 Xerox ® Versant ® 80 Press
System Administration Guide