Plug-In Settings; Using Plug-In Settings; Other Settings (Common Service Settings); Other Settings Overview - Xerox Versant 80 Press System Administration Manual

14. Select Save.
15. Select Close.
The main Tools screen displays.
16. Exit the administrator mode.

Plug-in Settings

Using Plug-in Settings

Use this feature to select and set any plug-in options, as applicable.
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Plug-in Settings.
6. Select either Embedded Plug-ins or select from a List of Embedded Plug-ins.
7. Select Save.
8. Select Close.
The main Tools screen displays.
9. Exit the administrator mode.

Other Settings (Common Service Settings)

Other Settings Overview

Use this feature to assign a variety of settings for commonly used features; options
include the following:
Offset Stacking (Right Middle Tray)
This feature is available only when the Standard/Booklet Maker Finisher is connected
to the machine. Select the default offset stacking option for the finisher tray:
None: If this option is selected, the finishing tray will not offset any output.
Offset per set: If this option is selected, the finishing tray will offset each set of a
copy/print job. This option also offsets each job.
Offset per job: If this option is selected, all the sets of a job are delivered on one
stack to the output area. When the next job starts, that job is offset from the previous
job in the tray. This option does not offset each set of a job.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-33