Log Utilities; Operations - Toshiba Satellite U840 Maintenance Manual

3.18 Log Utilities

This function logs error information generated while a test is in progress and stores the results
in RAM (Maximum error log : 500 times). This function can store data on a floppy disk. If
the power switch is turned off, the error information will be lost. Error information is
displayed in the following order:
1. Error count (CNT)
2. Test name and subtest number (TEST)
3. Pass count (PASS)
4. Error status (STS)
5. FDD/HDD or memory address (ADDR)
6. Write data (WD)
7. Read data (RD)
8. Error Name ( ERROR NAME/DETAILS)

3.18.1 Operations

1. Select 04 and press Enter in the Diagnostics Menu to log error information into RAM
or onto a floppy disk. Error information is displayed in the following format:
XXXX ERRORS
CNT TEST PASS
001 FDD 02 0000
002 FDD 01 0000
Pass Count
Subtest Number
Test Name
Error Count
[[1:Next, 2:Prev, 3:Exit, 4;Clear, 5:FD Log Read, 6:FD Log Write, 7:Log Save]]
58
PASSCOUNT = XXXX
STS ADDR WD
180 0000001 00
120 0000001 00
Address
Error Status
Write Data
Satellite U840 Tests and Diagnostics Manual
Test Program for Field.
RD ERROR NAME/DETAILS
00 WRITE PROTECTED
00 TIME OUT ERROR
Read Data
Error Name and Detail