IP Addressing
Command
clear host
helper address
ip address
ip address dhcp
ip address vlan
ip default-gateway
ip domain-lookup
ip domain-name
ip host
ip name-server
ipv6 address
ipv6 enable
ipv6 gateway
show arp switch
show hosts
show ip helper-address
show ip interface
management
NOTE:
*For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Description
Deletes entries from the host name-to-address
cache
Enable forwarding User Datagram Protocol
(UDP) Broadcast packets received on an
interface.
Sets a management IP address on the switch.
Acquires an IP address on an interface from the
DHCP server.
Sets the management VLAN.
Defines a default gateway (router).
Enables IP DNS-based host name-to-address
translation.
Defines a default domain name to complete
unqualified host names.
Configures static host name-to-address
mapping in the host cache.
Configures available name servers.
Set the IPv6 address of the management
interface.
Enable IPv6 on the management interface.
Configures an IPv6 gateway for the
management interface.
the entries in the ARP table.
Displays
Displays the default domain name, a list of
name server hosts, static and cached list of host
names and addresses.
Displays the ip helper addresses configuration.
Displays the management IP interface
information.
Command Groups
Mode*
PE
IC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
PE
UE
PE
PE
71