Hard Disk Kit (Hd-P06 - Konica Minolta BIZHUB C3100P Service Manual

[1]
[2]
[1]
13. To reinstall, reverse the order of removal.
14. Turn ON the power switch.
15. Select [SERVICE MODE] -> [SYSTEM 2] -> [AIDC PROCESS] -> [600dpi] to perform image stabilization.
I.3.6.4 AIDC PROCESS
16. Select [SERVICE MODE] -> [MACHINE] -> [SCAN ADJUST VALUE] to adjust the magnification in the main scan direction.
I.3.3.10 SCAN ADJUST VALUE
17. Select [SERVICE MODE] -> [MACHINE] -> [ALIGNMENT] -> [LEFT ADJUSTMENT] to adjust the side edge of each paper feeding port.
I.3.3.4 ALIGNMENT-LEFT ADJUSTMENT
18. Select [SERVICE MODE] -> [MACHINE] -> [ALIGNMENT] -> [LEFT ADJ DUPLEX] to adjust the side edge of each paper feeding port.
I.3.3.5 ALIGNMENT-LEFT ADJ DUPLEX

5.16 Hard disk kit (HD-P06)

1. Remove the rear center cover [1].
[1]
[1]
[2]
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
11. Cut the tie band [1], and remove the harness from three harness
guides [1].
12. Remove the PH unit [1].
2. Remove two screws [1], and remove the metal plate panel [2].
G-18
procedure (b...