Table of Contents
Advertisement
2. Installation Procedure
3. Mount the ADF [A] by aligning the screw keyholes [B] of the ADF support plate over the stud
screws.
4. Slide the ADF toward the front of the machine.
5. Secure the ADF with the two knob screws [C].
6. Attach the interface cable [D] to the inlet of the machine.
7. Attach the original setting and ADF exposure glass cleaning decal [A] to the top cover as shown.
8. Plug in and turn on the main power switch, and then check the ADF operation.
ADF Stabilizer Installation
50
Advertisement
Chapters
Table of Contents
