Fuel Pressure Pulsation Damper Installation - Lexus 2005 IS300 User Manual

New Gasket
(Large)
New Gasket
(Small)
SST
2005 LEXUS IS300 (RM1140U)
SFI - FUEL PRESSURE PULSATION DAMPER
INSTALLATION
1. INSTALL FUEL PRESSURE PULSATION DAMPER
(a) Install the fuel inlet pipe and pulsation damper with 2 new
gaskets.
HINT:
Different the gaskets are used for the upper (large side) and
lower (small side).
B02000
(b) Using SST, tighten the pulsation damper.
SST 09612-24014 (09617-24011)
Torque: 32.5 N·m (325 kgf·cm, 24 ft·lbf)
B09505
(c) Install the bolt holding the fuel inlet pipe to the intake man-
ifold.
Torque: 9.0 N·m (90 kgf·cm, 80 in.·lbf)
(d) Install the nut holding the No. 2 vacuum pipe to the intake
manifold.
Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)
B01582
2. CONNECT CONNECTOR AND HOSES
(a) Connect the vacuum hose (from No. 2 vacuum pipe) to
the air intake chamber.
(b) Connect the EVAP hose to the EVAP pipe.
(c) Connect the VSV connector for the EVAP.
3. INSTALL ENGINE COVER
Install the engine cover with the 4 nuts.
B09504
Author : Date :
SF-27
SF0NG-08
1408