Rear Upper Suspension Arm Installation - Lexus 2005 IS300 User Manual

A
2005 LEXUS IS300 (RM1140U)
SUSPENSION AND AXLE
INSTALLATION
B
1.
(a)
HINT:
After stabilizing the suspension arm, torque the nut.
F08220
(b)
2.
3.
4.
5.
- REAR UPPER SUSPENSION ARM
INSTALL UPPER SUSPENSION ARM
Install the upper suspension arm to the body with the 2
bolts, washers and 2 nuts.
Torque:
Nut A: 88 N·m (900 kgf·cm, 65 ft·lbf)
Nut B: 74 N·m (755 kgf·cm, 55 ft·lbf)
Connect the upper suspension arm to the axle carrier with
a new nut.
Torque: 108 N·m (1,100 kgf·cm, 80 ft·lbf)
INSTALL DRIVE SHAFT (See page
INSTALL REAR WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
CHECK REAR WHEEL ALIGNMENT
(See page SA-9 )
CHECK ABS SPEED SENSOR SIGNAL
w/ VSC (See page DI-507
w/o VSC (See page DI-437
Author :
SA-66 )
)
)
Date :
SA-121
SA1JK-05
1790