Tilt Steering Column Removal - Lexus 2005 IS300 User Manual

Torx Screw
Airbag Connector
Correct
Matchmarks
2005 LEXUS IS300 (RM1140U)
STEERING
REMOVAL
1.
NOTICE:
If the airbag connector is disconnected with the ignition
switch at ON or ACC, DTCs will be recorded.
(a)
Torx Screw
Case
(b)
(c)
HINT:
Loosen the 2 screws until the groove along the screw circumfer-
ence catches on the screw case.
F12189
(d)
CAUTION:
F
F
NOTICE:
When removing the wheel pad, take care not to pull the air-
bag wire harness.
Wrong
F12190
2.
(a)
(b)
(c)
(d)
SST
F12191
- TILT STEERING COLUMN
REMOVE STEERING WHEEL PAD
Place the front wheels facing straight ahead.
Remove the 2 steering wheel lower No. 2 covers.
Using a torx socket wrench, loosen the 2 torx screws.
Pull out the wheel pad from the steering wheel and dis-
connect the airbag connector.
When storing the wheel pad, keep the upper surface
of the pad facing upward.
Never disassemble the wheel pad.
REMOVE STEERING WHEEL
Disconnect the connector.
Remove the steering wheel set nut.
Place matchmarks on the steering wheel and main shaft
assembly.
Using SST, remove the wheel.
SST 09950-50013 (09951-05010, 09952-05010,
09953-05020, 09954-05021)
Author :
SR-13
SR1BS-02
Date :
1871