Lexus 2005 IS300 User Manual page 1257

SA-4
Approx. 25 mm (0.984 in.)
F04238
WAGON, REAR WHEEL:
Approx. 25 mm (0.984 in.)
2005 LEXUS IS300 (RM1140U)
SUSPENSION AND AXLE -
3. INSPECT WHEEL BALANCE
(a) Check and adjust the off-the-car balance.
(b) If necessary, check and adjust the on-the-car balance.
Imbalance after adjustment: 8.0 g (0.018 lb) or less
R07928
NOTICE:
F
Adhere the sticking type balance weight to the flat
position as shown in the illustration.
F
Push the balance weight securely with a finger to ad-
here it to the position.
(Pushing force: 10 kgf/more than 2 secs.)
F
After cleaning the surface which the balance weight
will be adhered to of dirt, oil and water with a cleaning
detergent, adhere the balance weight to the surface.
F08290
F
Do not touch the sticking surface of the tape.
F
Do not use the once used balance weight.
F
Please use the TOYOTA genuine sticking type bal-
ance weight.
F13674
4. CHECK WHEEL BEARING LOOSENESS
(a) Check the backlash in the bearing shaft direction.
Maximum: 0.05 mm (0.0020 in.)
(b) Check the axle hub deviation.
Maximum: 0.05 mm (0.0020 in.)
5. CHECK FRONT SUSPENSION FOR LOOSENESS
6. CHECK STEERING LINKAGE FOR LOOSENESS
7. CHECK BALL JOINT FOR LOOSENESS AND
EXCESSIVE PLAY (See page
R11097
8. CHECK SHOCK ABSORBER WORKS PROPERLY
F
Check if oil leaks
F
Check mounting bushings for wear
F
Bounce front and rear of the vehicle
TIRE AND WHEEL
Author :
SA-39 )
Date :
1673