Lexus 2005 IS300 User Manual page 1127

2005 LEXUS IS300 (RM1140U)
STEERING - TILT STEERING COLUMN
8. REMOVE TILT LEVER ASSEMBLY
(a) Remove the tension spring.
(b) Remove the spring nut, tilt lever assembly and tilt lever
link.
(c) Remove the 2 bushings from the upper column tube sub-
assembly.
9. REMOVE MAIN SHAFT ASSEMBLY WITH UPPER
COLUMN TUBE SUB-ASSEMBLY
(a) Using a hexagon wrench (6 mm), remove the 2 tilt steer-
ing shafts.
(b) Remove the pawl retainer and main shaft assembly with
the upper column tube sub-assembly.
F07919
(c) Using a pin punch (5 mm) and a hammer, remove the No.
2 tilt steering shaft and pawl assembly.
F07920
10. REMOVE UPPER COLUMN TUBE SUB-ASSEMBLY
FROM MAIN SHAFT ASSEMBLY
(a) Bent the joint of the main shaft at right angles, leaving the
cross ball in the No. 2 main shaft sub-assembly, separate
the main shaft into the No. 1 main shaft with upper column
tube sub-assembly and No. 2 main shaft sub-assembly.
F07921
(b) Secure the No. 1 main shaft with upper column tube sub-
assembly and SST in a vise.
SST
SST
F07922
09316-6001 1 (09316-00051)
Author :
SR-17
Date :
1875